Which fiber preparation should I use?

full bobbin!By Amelia © December 21, 2010

There has been a loooong silence here -- in part because I am working through a large commission job, 10 pounds of Romney roving, spun to 1600 ypp 2-ply (think fingering weight 2-ply), for a tapestry weaver using all local product and preparation. Yep, local sheep, local mill, local spinner (that's me!) Very cool, but not very "Ask The Bellwether"-able unless you want notes on how to spin consistently through that much fiber -- and maybe, you do. I'll have to work on that one.

The picture at the top the post is one of the recent bobbin-fulls.

So, while I work on that, here's some information I recently posted in the Hansen Crafts group on Ravelry to aid another spinner. Perhaps you will find it useful as well.

How you plan to use the fiber can influence the prep used as much as the type of fiber.

One guideline is to comb all fleeces with staple over 3 inches and card all fleeces with staple under 3 inches -- I’ve heard that many times, but to be honest I don’t pay much attention to it. Some of the reasoning is that it’s hard to handcard longer fibers, and hard to comb shorter fibers. But hard never stopped me. More reasoning is that longer staple fibers are very well suited to worsted preparations, which combing is, and shorter staple fibers are very well suited to woolen preparations, which combing is.

If I want the smoothest possible yarn, I know I need to either comb or flick-prep the locks, to keep all the fibers perfectly aligned. That said, I also know I can hand-card but roll the carded fiber to keep fibers aligned rather than the standard rolag-roll that puts them all in a spiral. And, my drum carder can help keep fibers pretty much aligned if I feed them all in lock-straight -- so it’s a very productive 80%-right solution.

If I want the airiest possible yarn, I know I need to handcard or drum card the fibers, or spin from a picked cloud. These preps can randomize the direction of the fiber -- spinning from the fold will do something similar, as the fold introduces the desire for the yarn to open-up and push its elbows out in the yarn. Drumcarding, I’d feed the locks in sideways similarly to get lots of air and direction in the fibers in the batt.

I’ve noticed different mills produce fairly different rovings; my local mill with Patrick Green equipment produces a truly random roving -- that's the mill that prepared the roving spun into yarn shown at the top of this post; while roving from Zeilinger’s is much more organized, almost sliver (not top, since different lengths of fiber are included in it).

Oh, and -- my Merino (and Cormo -mmmmm Cormo!) fleeces go to Morro Fleece Works. I can’t say enough good things about how nicely the Morro mill processes fine wools.

~~~~~

Related posts:
What fiber preparations are there?
Where can I get my fleece processed?

~~~~
© December 21, 2010 by Ask The Bellwether, posted at http://askthebellwether.com/blog

4 comments:

sarah said...

Given that I'm planning to spin for my first sweater, advice on maintaining consistency is welcome! I'll have a control card with a sample of the unwashed singles, and I've heard of winding off onto storage bobbins to ply last spun against first spun.

The merino x romney fleece I'm processing for the sweater looked too rustic when I spun samples from folded locks, much nicer for cables when spun from combed prep. So I'm combing it, but increasingly I worry about spinning too dense a yarn; I don't want true dense worsted yarn. Current plan is point-of-contact, fastish draw with relatively little twist in the singles, slightly overplied as 3-ply. Any comments or advice?

geeksdoitbetter said...

"suited to woolen preparations, which combing is"

i confuse combing and carding, just as often as i mixed up warp and weft

i wish i'd been on hand the day those crafters decided that opposite actions should be alliterative ~grin~

Sandy said...

I really do want to hear about consistency over a long spinning project because i have begun to buy larger quantities of fiber and wonder about this a lot. I have the idea of keeping a sample of the single and the plied on my wheel but can i really not drift off over a long period of time.

Nice to see your post. Merry Christmas!

slipstreamfiberarts said...

I find I get a more worsted yarn with spinning from the fold, as long as I'm using a short draw. A one-handed long draw and it's much more woolen. It's fun to experiment with the two drafting styles off the same prep.

Sarah, there's a good article in the summer 2010 (I think) Spin-Off by Carol Huebscher Rhoades, where she spins combed top in a way that introduces more air into the yarn. She uses an open drafting triangle where the base of the triangle is as wide as the length of her thumb (rather than just the tip). Check out the article, it's a neat way to spin for a loftier worsted!