Now, I'm a new weaver -- in some places I have (had -- thanks Weaver's Marketplace!) too many of some things. But in others, I have too few. Bobbins and quills, for starters.
Being a knitter first, I really want to get as much yarn on my shuttle as I can, so I have minimal ends. That was really the first shock of weaving -- cutting the warp up knowing I'd be throwing away 2-foot lengths across when I took it off the loom, and then relentlessly cutting my skein as I filled up bobbins, again, again, and again! I quickly gravitated to quills, which with their smaller core diameter, let me stuff more yarn onto the shuttle.
But I soon had several weaving projects going, and waste yarns available on a few of the quills too. What's a weaver to do?
In a perfect lightbulb moment, I realized that drinking straws might do the trick.
Yay! now I have an almost-infinite supply of quills. Now, the surface of the straw is slippery, not grabby like the cardboard quills. So, I tucked the end of the yarn into the middle of the straw, and caught it between straw and bobbin winder. It stayed put, and the quills filled up in no time.
The one drawback I found with my straw quills was that they are thin enough that the straw can get a little wedged in one end of the shuttle -- I guess I was tipping it too much that way, as this only happened one time. It was easy enough to put back into the channel where it belonged; I suppose you could wrap a rubber band around the end to thicken it and prevent that from happening.
I save miscellaneous small diameter paper rolls, too, like the one in the shot above; and one of my shuttles came with a brass quill -- Fan-cy! My other odd-ball shuttle is, I am told, a 120 film core. I haven't gone to the local photo place yet to see if they have more; it's got the nice small diameter like the quills, even if it's "only" 3 inches long. And, it clears my low profile shuttles perfectly. There is also a Bosworth charka quill there -- it fits in my Khadi Kanoo and Bosworth boat shuttles.
And pirns? Those are for end feed shuttles. I have a Schacht and a Bluster Bay, both the 13" models. I love the open threading of the Schacht -- being a new weaver, I still unweave a fair bit (especially my stick-to-itself cottolin warp, sigh). It's nice to be able to take the pirn out and wind back onto it easily while I work my way back down to the mistake(s!!) However, it's got just a light oil finish, which makes it have more friction than my more polished Bluster Bay shuttle. The BB flows better over the cottolin warp. It's too bad that the Schacht takes a 6" pirn and the BB takes a 5.5" one ... I haven't tried to put the 5.5" pirns on the Schacht shuttle yet, since I already have the 6" pirns for it. The cardboard pirns fit in nothing so far. Maybe eventually a shuttle they fit will come along.
Here's the cottolin warp, first tea towel done on-the-loom, second one to be started ... tomorrow!